e-M10 500W 36V
OUR MOST VERSATILE ELECTRIC SCOOTER
Customers who bought this product also bought:
OUR MOST VERSATILE ELECTRIC SCOOTER.
The e-M10 mountain electric scooter is the ideal scooter for everyday use on any terrain. Given that it is so stable, comfortable and safe, any tour becomes a recreation time.
The 500W engine gives it enough power to climb not very steep slopes (obviously depending on the incline of the slope and the weight of the pilot). The battery is reinforced for use in the mountains: both inside (so that the rattle does not damage the batteries) and in the lane where it is embedded. It is easily mounted and disassembled with a key for added security. For rentals the acquisition of two batteries per scooter is recommended in order to exchange them after each use.
Its low centre of gravity plus a CrMb steel reinforced chassis and high quality components make it a strong and durable electric scooter as well as an excellent mountain machine for a very wide audience.
CE certificate No. 16/32301318. Validated, certified and approved in accordance with Directive 2006/42 / EC of machines, which also governs electric bicycles. So the same local traffic regulations as bicycles apply.
WEIGHT: 22 KG
FRAME: Chrome-moly steel.
FORK: RST CAPA 26”, Travel 80mm.
BRAKES: Front: hydraulic disc brake Ø 160mm. Rear: mechanical disc brake Ø 203mm. With a sensor rear brake not to burn the motor or the controller in case of braking and accelerating at the same time.
WHEELS: Front: Optional Ø 26" x 2.00 or 26" x 2.35. Rear: Ø 20" x 2.00
STEM: Adjustable length, Ø 31,8.
BOARD: Antislide surface. Beech board from Brittany in hot forming. Aluminum scuff guard. Wide board, measures: 700 X 200 X 10 mm.
FRAME PROTECTIONS: Aluminum 2mm
MUDGUARDS: Aluminum 2mm
BATTERY CYCLES: more than 800
LITHIUM-ION BATTERY 36V 17,5 Ah. Box with key lock.
MAX. SPEED: 25km/h
MAXIMUM SPEED WITHOUT LIMITATION PROGRAMMED: 35 km/h
REAR WHEEL INSTALLATION
Mushing 1-4 Dogs
Max. weight Rider
Frame not suitable for jumping
The board of e-M10 is narrower to facilitate the kick, to avoid hits at the ankle and helps carry the weight correctly to conserve the inertia and obtain maximum speed.
Board is made of laminated beech from Britain, hot forming to high pressure and using special glues for outdoors. The woods are polished, treated with fungicides against moisture and finally varnished. The wood is coated with a non-skid sandpaper, just like a skateboard, for a rider´s feet better grip. This leaves a completely smooth surface for the feet, without pieces of iron that end up hurting the rider´s feet and damaging the soles.
The inner board, which is not seen without disassembling the scooter, combined with the upper board and frame tubes provides the assembly a great strength. This sandwich system comprising the boards and frame is patented by Gravity Scooters and is another of our unique features.
The frame of e-M10 is made of CrMb Steel, the most resistant steel.
Its medium height (distance from the board to the ground) is necessary to avoid the rocks of the road in descent, although is low enough not to lose the sensation of surfing the roads that with the augment of this distance disappears.