THE PERFECT DOWNHILL MACHINE FOR THE MOST DEMANDING RIDER.
The DH Raptor downhill scooter is at the same time the most extreme and the softest Gravity. What is the secret? The combination of several factors: A low centre of gravity, a long geometry, a good front axle launch and a big fork. This perfect mix results in spectacular behaviour in any scenario, even in the reception of the most technical jumps.
The DH Raptor is a unique model. Its 26 ”x 2.35 front wheels and 19” x 2.5 rear wheel stick to the ground like nothing else. Its DH components have proven their quality at the World Cup podium: the FOX 40 fork eliminates vibrations and the 4-piston SHIMANO ZEE brake provides extreme precision and smoothness.
Focus on driving and feel the maximum pleasure in a descent. The DH Raptor sticks to the road like nothing else.
- Weight: 16,7 KG
- Frame: Chrome-moly steel.
- Fork: Fox 40 , Double crown. Coil. Travel203 mm. Aluminum DH axle 20mm. Weight 2,63 Kg
- Brakes: Shimano ZEE Hydraulic disc brake Ø 203mm.
- Wheels: Front: Ø 26" x 2.35” Tire Schwalbe Space. Rear: Ø 19" x 2.5" Bike Trial
- Handelbar: 740mm DH
- Board: Antislide surface. Beech board from Brittany in hot forming. Aluminum scuff guard. Wide board, measures: 700 X 200 X 10 mm.
- Frame protections: Aluminum 2mm
- Mudguards: Aluminum 2mm
The board of the DH range is wide, allows a ride using all the body weight, this helps you to taking bends and to feeling a similar feel to that of board sports.
Board is made of laminated beech from Britain, hot forming to high pressure and using special glues for outdoors. The woods are polished, treated with fungicides against moisture and finally varnished. The wood is coated with a non-skid sandpaper, just like a skateboard, for a rider´s feet better grip. This leaves a completely smooth surface for the feet, without pieces of iron that end up hurting the rider´s feet and damaging the soles.
The inner board, which is not seen without disassembling the scooter, combined with the upper board and frame tubes provides the assembly a great strength. This sandwich system comprising the boards and frame is patented by Gravity Scooters and is another of our unique features.
The frame of M10 Trail is made of CrMb Steel, the most resistant steel.
Its medium height (distance from the board to the ground) is necessary to avoid the rocks of the road in descent, although is low enough not to lose the sensation of surfing the roads that with the augment of this distance disappears.
MEASURES (IN CM)
|DISC BRAKE (mm)||WEIGHT (kg)||Front wheel |
|Pixies||Acero||RST Capa 50||Mecánico||Mecánico||160||12||20"x2.20||16"x2.40||640|
|M10 trail||Acero CrMo||RST Capa 80||Hidráulico||Hidráulico||160||14,5||26"x2.00||20"x2.00 / 19"x2.50||640|
|Mushing pro||Acero CrMo||RST Dirt 130||Hidráulico||Mecánico||160||12||26"x2.35||19"x2.50||740|
|DH Core||Acero CrMo||RST Dirt 130||Hidráulico||Hidráulico||203||16,7||26"x2.35||19"x2.50||740|
|DH Core Air||Acero CrMo||RST Titan 150||Hidráulico||Hidráulico||203||16||26"x2.35||19"x2.50||740|
|DH Iron||Acero CrMo||MARZOCCHI
|DH Raptor||Acero CrMo||Fox 40||Hidráulico||Hidráulico||230||16,7||26"x2.35||19"x2.50||740|