INITIATE THE LITTLE ONES TO THE WORLD OF MUSHING AND DOWNHILL SCOOTERING A BIG WAY.
Due to its balanced weight, its strong steel chassis and the quality of its components, the "Pixies" children's mountain scooters are easy to drive, reliable and durable. This makes them the best vehicle to initiate the little ones to the practice of mushing, mountain walks and, why not, downhill scootering.
The great dominance over dogs, braking power and great stability in general is possible thanks to the strong steel chassis of 4Kg weight, which greatly facilitates driving and provides confidence to small mushers.
The Pixies is a high scooter, so you will avoid scratching with the ground. Its large board will allow you to adopt the position of the surfer, essential for maximum stability; and it will leave you a totally free surface for the feet with which you will enjoy an intuitive and fun driving while avoiding undesirable accidents.
Rolling with the little ones is possible thanks to the Pixies scooter. Let them accompany you on your adventures without fear of giving up halfway.
- Weight: 12KG
- Frame: Steel.
- Fork: RST CAPA 20”, Travel 50mm.
- Brakes: Mechanic disc 160 mm
- Wheels: Front: Ø 20" x 2.175 Rear: Ø 16" x 2.4
- Handlebar: 640mm
- Board: Antislide surface. Beech board from Brittany in hot forming. Narrow board, measures: 570 x 140 x 10.
- Frame protections: Aluminum 2mm
- Mudguards: Aluminum 2mm
The board of Pixies is narrower to facilitate the kick, to avoid hits at the ankle and helps carry the weight correctly to conserve the inertia and obtain maximum speed.
Board is made of laminated beech from Britain, hot forming to high pressure and using special glues for outdoors. The woods are polished, treated with fungicides against moisture and finally varnished. The wood is coated with a non-skid sandpaper, just like a skateboard, for a rider´s feet better grip. This leaves a completely smooth surface for the feet, without pieces of iron that end up hurting the rider´s feet and damaging the soles.
The inner board, which is not seen without disassembling the scooter, combined with the upper board and frame tubes provides the assembly a great strength. This sandwich system comprising the boards and frame is patented by Gravity Scooters and is another of our unique features.
The frame of Pixies is made of Steel.
Its medium height (distance from the board to the ground) is necessary to avoid the rocks of the road in descent, although is low enough not to lose the sensation of surfing the roads that with the augment of this distance disappears.
MEDIDAS (EN CM)
|Weight (kg)||Front wheel |
|Pixies||Steel||RST Capa 50||Mechanic||Mechanic||160||12||20"x2.20||16"x2.40||640|
|Pixies Basic||Steel||RST Capa 50||V-Brake||V-Brake||12||20"x2.2175||16"x2.40||640|
|M10 Basic||CrMo steel||RST Capa 80||V-Brake||V-Brake||14,5||26"x2.00||20"x2.00||640|
|M10||CrMo steel||RST Capa 80||Hydraulic||Mechanic||160||14,5||26"x2.00||20"x2.00||640|
|M10 trail||CrMo steel||RST Capa 80||Hydraulic||Hydraulic||160||14,5||26"x2.35||20"x2.00 / 19"x2.50||640|
|Pulka||Aluminio T6||RST Capa 80||Hydraulic||Mechanic||160||12||26"x2.00||20"x2.00||640|
|Pulka R||Aluminio T6||Carbon fork||V-Brake||Mechanic||160||9||700 32C||20"x1,75||640|
|Mushing pro||CrMo steel||RST Dirt 130||Hydraulic||Mechanic||160||16,7||26"x2.35||19"x2.50||740|
|DH Core||CrMo steel||RST Dirt 130||Hydraulic||Hydraulic||203||16,7||26"x2.35||19"x2.50||740|
|DH Core Air||CrMo steel||RST Titan 150||Hydraulic||Hydraulic||230||16||26"x2.35||19"x2.50||740|