M10 Outlet

Condition: New (small dent in elliptical tube)

400.00 €

(484.00€ VAT included)

M10 Outlet

Condition: New (small dent in elliptical tube)

400.00 €

(484.00€ VAT included)

Description

Ideal for mushing with one, two and three dogs.

Perfect for sprint mushing competition or sporting use on dirt or asphalt. Its light-weight and low-off-the -ground design optimises propulsion on the flat and uphill.

It is a low scooter, with a large board, easy to drive and agile. A very resistant CrMo steel frame and its quality components make it strong and durable. The CrMb steel frame is ideal for people who are looking for, in the practice of Mushing, a higher control of the scooter over the dogs, better braking and better general stability. The long board means the rider can position their feet away from the handlebars; this, with the arms extended, helps to lengthen the propulsion kick, giving the arms, abs, back and legs a comprehensive workout and achieving high speeds.

Technical characteristics

  • Weight: 14,5 KG
  • Frame: Chrome-moly steel. Small dent in elliptical tube.
  • Fork: RST CAPA 26”, Travel 80mm.
  • Brakes: Shimano hydraulic disc brake 160 mm
  • Wheels: Front: Ø 26" x 2.00. Rear: Ø 20" x 2.00
  • Handlebar: 640mm
  • Board: Antislide surface. Beech board from Brittany in hot forming. Narrow board, measures: 500 x 140 x 10.
  • Frame protections: Aluminum 2mm
  • Mudguards: Aluminum 2mm

The defect described below do not influence the operation of the scooter, defect is only aesthetic. All components are new and in perfect condition.

The board

The board of M10 is narrower to facilitate the kick, to avoid hits at the ankle and helps carry the weight correctly to conserve the inertia and obtain maximum speed.

Board is made of laminated beech from Britain, hot forming to high pressure and using special glues for outdoors. The woods are polished, treated with fungicides against moisture and finally varnished. The wood is coated with a non-skid sandpaper, just like a skateboard, for a rider´s feet better grip. This leaves a completely smooth surface for the feet, without pieces of iron that end up hurting the rider´s feet and damaging the soles.

The inner board, which is not seen without disassembling the scooter, combined with the upper board and frame tubes provides the assembly a great strength. This sandwich system comprising the boards and frame is patented by Gravity Scooters and is another of our unique features.

The frame

The frame of M10 is made of CrMb Steel, the most resistant steel.

Its medium height (distance from the board to the ground) is necessary to avoid the rocks of the road in descent, although is low enough not to lose the sensation of surfing the roads that with the augment of this distance disappears.

MEASURES (IN CM)

MEASURES M10

 Material
Chasis
Horquilla
(recorrido mm)
Freno
Delantero
Freno
Trasero
Disco
Freno (mm)
Peso (kg)Rueda Del.
Neumático
Rueda Tras.
Neumático
Manillar
(mm)
Pixies Acero RST Capa 50 Mecánico Mecánico 160 12 20"x2.20 16"x2.40 640
M10 Basic Acero CrMo RST Capa 80 V-Brake V-Brake 160 14,5 26"x2.00 20"x2.00 640
M10 Acero CrMo RST Capa 80 Hidráulico Mecánico 160 14,5 26"x2.00 20"x2.00 640
M10 trail Acero CrMo RST Capa 80 Hidráulico Hidráulico 160 14,5 26"x2.35 20"x2.00 / 19"x2.50 640
Pulka Aluminio T6 RST Capa 80 Hidráulico Mecánico 160 12 26"x2.00 20"x2.00 640
Pulka R Aluminio T6 Carbon fork V-Brake Mecánico 160 9 700 32C 20"x1,75 640
Mushing pro Acero CrMo RST Dirt 130 Hidráulico Mecánico 160 16,7 26"x2.35 19"x2.50 740
DH Core Acero CrMo RST Dirt 130 Hidráulico Hidráulico 203 16,7 26"x2.35 19"x2.50 740
DH Core Air Acero CrMo RST Titan 150 Hidráulico Hidráulico 230 16 26"x2.35 19"x2.50 740