Ideal for mushing with one, two and three dogs.
The M10 is a mountain scooter specially designed for sprint mushing competition or for sports use on dirt or asphalt terrains. Its light-weight and low-off-the -ground design optimises propulsion whether it is flat or uphill and it also fits well for downhill or for sport trips with dogs.
Both its low gravity centre and its large board make it easy to drive and so agile. A very resistant CrMo steel frame and its quality components make it strong and durable. The CrMb steel frame is ideal for those mushers who are looking for a higher control of the scooter over the dogs, a better braking and a better stability overall. The large board means that the rider can position their feet away from the handlebars; this, with the arms extended, helps to lengthen the propulsion kick, giving the arms, abs, back and legs a comprehensive workout and achieving high speeds.
Go on a adventure in the nature with up to three dogs. Whether in the undergrowth, in the countryside, on paved road or dirt road, you will enjoy like a kid.
- Weight: 14,5 KG
- Frame: Chrome-moly steel.
- Fork: RST CAPA 26”, Travel 80mm.
- Brakes: Hydraulic/ Mechanic disc 160 mm
- Wheels: Front: Ø 26" x 2.00. Rear: Ø 20" x 2.00
- Handlebar: 640mm
- Board: Antislide surface. Beech board from Brittany in hot forming. Narrow board, measures: 500 x 140 x 10.
- Frame protections: Aluminum 2mm
- Mudguards: Aluminum 2mm
The board of M10 is narrower to facilitate the kick, to avoid hits at the ankle and helps carry the weight correctly to conserve the inertia and obtain maximum speed.
Board is made of laminated beech from Britain, hot forming to high pressure and using special glues for outdoors. The woods are polished, treated with fungicides against moisture and finally varnished. The wood is coated with a non-skid sandpaper, just like a skateboard, for a rider´s feet better grip. This leaves a completely smooth surface for the feet, without pieces of iron that end up hurting the rider´s feet and damaging the soles.
The inner board, which is not seen without disassembling the scooter, combined with the upper board and frame tubes provides the assembly a great strength. This sandwich system comprising the boards and frame is patented by Gravity Scooters and is another of our unique features.
The frame of M10 is made of CrMb Steel, the most resistant steel.
Its medium height (distance from the board to the ground) is necessary to avoid the rocks of the road in descent, although is low enough not to lose the sensation of surfing the roads that with the augment of this distance disappears.
MEASURES (IN CM)
|Weight (kg)||Front wheel |
|Pixies||Steel||RST Capa 50||Mechanic||Mechanic||160||12||20"x2.20||16"x2.40||640|
|M10 Basic||CrMo steel||RST Capa 80||V-Brake||V-Brake||160||14,5||26"x2.00||20"x2.00||640|
|M10||CrMo steel||RST Capa 80||Hydraulic||Mechanic||160||14,5||26"x2.00||20"x2.00||640|
|M10 trail||CrMo steel||RST Capa 80||Hydraulic||Hydraulic||160||14,5||26"x2.35||20"x2.00 / 19"x2.50||640|
|Pulka||Aluminio T6||RST Capa 80||Hydraulic||Mechanic||160||12||26"x2.00||20"x2.00||640|
|Pulka R||Aluminio T6||Carbon fork||V-Brake||Mechanic||160||9||700 32C||20"x1,75||640|
|Mushing pro||CrMo steel||RST Dirt 130||Hydraulic||Mechanic||160||16,7||26"x2.35||19"x2.50||740|
|DH Core||CrMo steel||RST Dirt 130||Hydraulic||Hydraulic||203||16,7||26"x2.35||19"x2.50||740|
|DH Core Air||CrMo steel||RST Titan 150||Hydraulic||Hydraulic||230||16||26"x2.35||19"x2.50||740|