GRAVITY e-CORE 1000W 48V
ELECTRIC MOUNTAIN SCOOTER
Customers who bought this product also bought:
OUR ELECTRIC SCOOTER DESIGNED FOR MOUNTAIN
The e-CORE scooter is quiet, powerful, stable, comfortable and safe. On it any descent, route or road are fun.
The 1000W engine gives it enough power to climb steep slopes (obviously depending on the incline of the slope and the weight of the pilot). The battery is reinforced for use in the mountains: both inside (so that the rattle does not damage the batteries) and in the lane where it is embedded. It is easily mounted and disassembled with a key for added security.
Its low center of gravity next to a reinforced CrMb steel chassis and high-end descent components (19 "x 2.5 wide tire, disc brakes, wide handlebar and 130 mm fork), make it an electric mobility machine ideal for mountain use.
WEIGHT: 24 KG
FRAME: Chrome-moly steel.
FORK: RST Blaze 26”, Travel 120mm.
BRAKES: Front and rear : Shimano mechanical dic brake Ø 230mm. With brake sensor not to burn the motor or the controller in case of braking and accelerating at the same time.
WHEELS: Front: 26" x 2.35. Rear: Ø 20" x 2.4
BOARD: Antislide surface. Beech board from Brittany in hot forming. Aluminum scuff guard. Wide board, measures: 700 X 200 X 10 mm.
FRAME PROTECTIONS: Aluminum 2mm
MUDGUARDS: Aluminum 2mm
BATTERY CYCLES: more than 800
LITHIUM-ION BATTERY 48V 17,5AH. Box with key lock.
MAX. SPEED: 25km/h
MAXIMUM SPEED WITHOUT LIMITATION PROGRAMMED: 45 km/h
REAR WHEEL INSTALLATION
Mushing 1-4 Dogs
Max. weight Rider
Not suitable for jumping
The board of the e-CORE is wide, allows a ride using all the body weight, this helps you to taking bends and to feeling a similar feel to that of board sports.
Board is made of laminated beech from Britain, hot forming to high pressure and using special glues for outdoors. The woods are polished, treated with fungicides against moisture and finally varnished. The wood is coated with a non-skid sandpaper, just like a skateboard, for a rider´s feet better grip. This leaves a completely smooth surface for the feet, without pieces of iron that end up hurting the rider´s feet and damaging the soles.
The inner board, which is not seen without disassembling the scooter, combined with the upper board and frame tubes provides the assembly a great strength. This sandwich system comprising the boards and frame is patented by Gravity Scooters and is another of our unique features.
The frame of e-CORE is made of CrMb Steel, the most resistant steel.
Its medium height (distance from the board to the ground) is necessary to avoid the rocks of the road in descent, although is low enough not to lose the sensation of surfing the roads that with the augment of this distance disappears.