Mountain scooter frame M10
CHROME-MOLY STEEL FRAME
Customers who bought this product also bought:
Grade Comments (0)
M10 CHROME-MOLY STEEL FRAME
A GEOMETRY THAT FAVORS THE POSITION OF THE SURFER, ERECT AND CENTERED, OPTIMAL TO CONTROL AND ENJOY.
An obstacle free frame that does not separate the legs with a large board that provides comfort never seen on a scooter.
Includes: boards, protection plate and mudguards
FOR FORKS OF LESS THAN 120MM OF TRAVEL.
WEIGHT: 5,1 KG
FRAME: CrMb steel. With a bushing to be able to install a semi-integrated headset 1 1/8 in diameter 44 x44. Without bushing to be able to install tapered 44 x 56 headsets. 155 mm steerer tube. Width of dropouts 100mm.
FORK: recommended for forks of less than 120mm of travel.
BRAKES: with adapter for disc brake 160mm.
WHEELS: Front: admits wheel up to 28 ". Rear: admits wheel up to 20", for axle 100 mm.
BOARD: Thermo-pressed Brittany beech wood with non-slip rubber surface. Narrow wood profile, measurements in mm: 640 x 140 x 10 mm. It also includes an interior wood that gives elasticity and great resistance to the wood-frame assembly.
FRAME PROTECTIONS: 2mm aluminum protection for the bottom of the frame.
MUDGUARDS: Small aluminum mudguard to protect the rear wheel. Aluminum 2mm.
Max. weight Rider
The board of M10 frame is narrower to facilitate the kick, to avoid hits at the ankle and helps carry the weight correctly to conserve the inertia and obtain maximum speed.
Board is made of laminated beech from Britain, hot forming to high pressure and using special glues for outdoors. The woods are polished, treated with fungicides against moisture and finally varnished. The wood is coated with a non-skid sandpaper, just like a skateboard, for a rider´s feet better grip. This leaves a completely smooth surface for the feet, without pieces of iron that end up hurting the rider´s feet and damaging the soles.
The inner board, which is not seen without disassembling the scooter, combined with the upper board and frame tubes provides the assembly a great strength. This sandwich system comprising the boards and frame is patented by Gravity Scooters and is another of our unique features.
NOVELTY! The new grip tape, the CreamGrip. The CreamGrip is made of “RUBBER”, so it is waterproof and easy to clean with a damp cloth.
In addition, for every CreamGrip tape sold, another will be donated to a community of skaters in developing regions that use skateboarding as a means of reintegrating people at risk of exclusion. You want to know more?
The frame of M10 is made of CrMb Steel, the most resistant steel.
Its medium height (distance from the board to the ground) is necessary to avoid the rocks of the road in descent, although is low enough not to lose the sensation of surfing the roads that with the augment of this distance disappears.
The protection plate that protects the entire lower part of the scooter.
Having a smooth plate along the entire length of the scooter allows us to lower the height at which our feet go and increase safety, good sensations and facilitates propulsion, without being afraid of getting caught in an obstacle or damaging the scooter.
In the first mountain outings it is normal to worry about the sound of scratching but the rider quickly gets used to it, appreciates going so low and learns to play with the plate.